| P/2 DA1, P/2 DA1 USB |
| |
| Video |
| Gain |
0 dB, 0.6 dB, 1.2 dB, selectable: when input is 0.7 Vp-p, output is 0.7 V, 0.75 V, 0.8 Vp-p when switch is at normal, medium, and maximum positions, respectively |
| Bandwidth |
300 MHz (-3 dB) |
| |
| Video input |
| Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video |
| Connectors |
1 male 15-pin HD |
| Nominal level |
1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels |
Analog: 0.3 VDC to 1.5 VDC p-p with no offset at unity gain |
| Impedance |
75 ohms |
| Horizontal frequency |
15 kHz to 135 kHz |
| Vertical frequency |
30 Hz to 170 Hz |
| ID bits |
Pins 4, 9, 11, 12, and 15 are passed through to output. |
| |
| Video output |
| Number/signal type |
1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video |
| Connectors |
1 female 15-pin HD |
| Nominal level |
1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video |
| Minimum/maximum levels |
Analog: 0.3 VDC to 1.5 VDC p-p with no offset at unity gain |
| Impedance |
75 ohms |
| DC offset |
±5 mV maximum with input at 0 offset |
| NOTE |
Output resolution may vary depending on whether the P/2 DA1 is attached to the computer at startup, and on the type of computer you are using. |
|
| |
| Sync |
| Input type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Output type |
RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync |
| Input level |
2.0 V to 5.0 Vp-p |
| Output level |
TTL: 5 Vp-p |
| Input impedance |
510 ohms |
| Output impedance |
75 ohms |
| Max. propagation delay |
18.8 ns |
| Max. rise/fall time |
4 ns |
| Polarity |
Positive or negative |
| |
| General |
| Power |
|
| P/2 DA1 |
100 to 250 VAC, 4 watts, maximum, external, attached |
| P/2 DA1 USB |
USB (5.0 VDC, 0.2 A) |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
No |
| Enclosure type |
Plastic clamshell |
| Enclosure dimensions |
0.6" H x 1.3" W x 3.1" D
(1.4 cm H x 3.3 cm W x 7.9 cm D) |
| Product weight |
|
| P/2 DA1 |
0.5 lb (0.3 kg) |
| P/2 DA1 USB |
0.1 lb (<0.1 kg) |
| Shipping weight |
1 lb (1 kg) |
| Vibration |
ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
|
| Safety |
CE, c-UL, UL |
| EMI/EMC |
CE |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |
