| MLC 62 Series |
| |
| Control — host ports |
| Serial control port |
1 bidirectional RS-232 on a 3.5 mm captive screw connector, 3 pole |
| Baud rate and protocol |
9600 baud, 8 data bits, 1 stop bit, no parity |
| Serial control pin configuration |
Pin 1 = Tx, pin 2 = Rx, pin 3 = GND |
| USB control ports |
|
| Decora® models |
1 front panel female mini USB B |
| MK and EU models |
1 side panel female mini USB B |
| USB standards |
USB 2.0, low speed |
| IR learning frequencies |
30 kHz to 60 kHz |
| IR learning distance |
4" (10 cm) to 14" (36 cm) from the receiver (on front panel for Decora models, side panel for MK and EU models) |
| Program control |
Extron configuration program for Windows®
Extron Simple Instruction Set (SIS™) |
| |
| Control — serial port (RS models) |
| Display control port |
(1) 3.5 mm captive screw connector, 2 pole for unidirectional RS-232 control (±5 V) |
| Baud rate and protocol (RS-232) |
9600 (default), 19200, 38400, 57600, 115,200 baud; 8 (default) or 7 data bits; 1 stop bit; no parity (default), or even or odd parity |
| |
| Control — IR port (IR models) or IR/serial port (RS models) |
| IR control port |
(1) 3.5 mm captive screw connector, 2 pole for IR or IR/Serial* (transmit only)
TTL level (0 to 5 V) modulated infrared control (all models) from 30 kHz up to 60 kHz, or ±5 V RS-232 control (RS models, transmit only)
*For RS models, IR/serial ports are configurable via software, serial communication is the default. |
| Baud rate and protocol |
For RS models:
9600 (default), 19200, 38400, 57600, 115,200 baud; 8 (default) or 7 data bits; 1 stop bit; no parity (default), or even or odd parity |
| |
| Control — relay (RS models) |
| Number/type |
2 momentary or latching (configurable via software) |
| Connector |
(1) 3.5 mm captive screw connector, 3 pole |
| Contact rating |
24 V, 1 A |
| |
| Control — digital input monitoring port (RS models) |
| Number/type |
1 digital input (configurable) |
| Connector |
(1) 3.5 mm captive screw connector, 2 pole |
| Digital inputs |
|
| Input voltage range |
0-24 VDC |
| Input impedance |
12k ohms |
| Programmable pullup |
2k ohms to +5 VDC |
| Threshold low to high |
>1.5 VDC |
| Threshold high to low |
<1.0 VDC |
| |
| General |
| External power supply |
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated |
| Power input requirements |
12 VDC, 0.4 A, max. |
| Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling |
Convection, no vents |
| Mounting |
|
| Rack mount |
No |
| Furniture or wall mount |
|
| Decora® models |
Mounts in a standard 1 gang US electrical junction box (1.50" depth) or with included mud ring. |
| EU models |
Mounts in a standard 1 gang EU electrical junction box with 60 mm mounting centers (40 mm depth). An adapter frame is included. |
| MK models |
Mounts to a standard 47 mm deep MK electric type British standard wall box. |
| Enclosure type |
Plastic |
| Enclosure dimensions |
|
| MLC 62 IR D, MLC 62 RS D |
|
| Faceplate |
2.6" H* x 1.3" W x 0.2" D
(6.6 cm H* x 3.3 cm W x 0.4 cm D)
(Fits the opening in a 1 gang Decora® faceplate. *Height is 2.8" [7.0 cm] and width is 1.5" [3.8 cm] including outer shoulders.) |
| Device |
2.8" H x 1.8" W x 0.9" D
(7.0 cm H x 4.5 cm W x 2.1 cm D)
(Overall rear dimensions, including connectors. Allow at least 1.5" [3.7 cm] depth in the wall or furniture for device and cable clearance.) |
